C26s Cartridge Mechanical Seal Manufacturer With Water Pumps Mechanical Seals 25 mm to 100 mm

C26S Cartridge Mechanical Seal for Paper Pulp Pumps and Sewage Pumps

Suggested Operation Limits:
Temperature:-40ºC~220ºC
Speed:≤15M/S
Pressure:≤1.6Mpa
Size:25mm-100mm

Combined Material:
Rotary Face:SIC/TC
Stat Ring:CAR/SIC/TC

Features:
1.Single seal
2.Cartridge
3.Balanced
4.Independent of direction of rotation
5.Single seals without connections (-SNO), with flush (-SN) and with quench combined with lip seal (-QN) or throttle ring (-TN)

Advantages:
1.Ideal seal for standardizations
2.Universal applicable for packings conversions, retrofits or original equipment
3.No damage of the shaft by dynamically loaded O-Ring
4.Extended service life
5.Straightforward and easy installation due to pre-assembled unit

Recommended Applications:
1.Process industry
2.Petrochemical industry
3.Chemical industry
4.Pharmaceutical industry
5.Power plant technology
6.Pulp and paper industry
7.Water and waste water technology
8.Mining industry
9.Food and beverage industry
10.Sugar industry
11.Universally applicable
12.Centrifugal pumps

Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.