Products >> Cartridge Mechanical Seal >>
Mechanical Seal Water Pump Seal Type Lp-D-SA Cartridge Mechanical Seal Multistage Cartridge Seal
- Product No.:Lp-D
Mechanical Seal Water Pump Seal Type LP-D-SA Cartridge Mechanical Seal Multistage Cartridge Seal
LP-D Cartridge Mechanical Seal for Paper Pulp Pumps and Sewage Pumps
Description:
Pressure: 0 ~ 1.6 MPa
Temperature: - 40 ~ 180 ºC
Linear Speed: 20 m/s or less
Structure: Double-End
Pressure: Medium Pressure Mechanical Seals
Speed: General Speed Mechanical Seal
Temperature: General Temperature Mechanical Seal
Performance: Wear and Corrosion
Standard: Enterprise Standard
Model NO.: LP-D
Balance: Balanced
Specification: Inner Diameter: 45 mm to 200 mm
Material:
Rotary Ring Face
Medium Side: SiC/TC
Sealing Water Side: SiC/TC
Stationary Ring Face
Medium Side: SiC/TC
Sealing Water Side: Carbon/SiC/TC
Elastomers: FKM/EPDM/PTFE
Springs: SS316/HC276
Metal Parts: SS316L/2507/2205
Mechanical Seal Water Pump Seal Type LP-D-SA Cartridge Mechanical Seal Multistage Cartridge Seal
LP-D Cartridge Mechanical Seal for Paper Pulp Pumps and Sewage Pumps
Description:
Pressure: 0 ~ 1.6 MPa
Temperature: - 40 ~ 180 ºC
Linear Speed: 20 m/s or less
Structure: Double-End
Pressure: Medium Pressure Mechanical Seals
Speed: General Speed Mechanical Seal
Temperature: General Temperature Mechanical Seal
Performance: Wear and Corrosion
Standard: Enterprise Standard
Model NO.: LP-D
Balance: Balanced
Specification: Inner Diameter: 45 mm to 200 mm
Material:
Rotary Ring Face
Medium Side: SiC/TC
Sealing Water Side: SiC/TC
Stationary Ring Face
Medium Side: SiC/TC
Sealing Water Side: Carbon/SiC/TC
Elastomers: FKM/EPDM/PTFE
Springs: SS316/HC276
Metal Parts: SS316L/2507/2205
LP-D Cartridge Mechanical Seal for Paper Pulp Pumps and Sewage Pumps
Description:
Pressure: 0 ~ 1.6 MPa
Temperature: - 40 ~ 180 ºC
Linear Speed: 20 m/s or less
Structure: Double-End
Pressure: Medium Pressure Mechanical Seals
Speed: General Speed Mechanical Seal
Temperature: General Temperature Mechanical Seal
Performance: Wear and Corrosion
Standard: Enterprise Standard
Model NO.: LP-D
Balance: Balanced
Specification: Inner Diameter: 45 mm to 200 mm
Material:
Rotary Ring Face
Medium Side: SiC/TC
Sealing Water Side: SiC/TC
Stationary Ring Face
Medium Side: SiC/TC
Sealing Water Side: Carbon/SiC/TC
Elastomers: FKM/EPDM/PTFE
Springs: SS316/HC276
Metal Parts: SS316L/2507/2205
Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.
Products Category
Contact Us
Name: Leo Zhang
Tel: +86-13067871876
E-mail: [email protected]
Add: Building 2, No. 12, Shengdi Road, Yuhang street, Yuhang District, Hangzhou
Link