Products >> Cartridge Mechanical Seal >>
Double Cartridge Mechanical Seal to Replace AES Cure for Pump Parts
- Product No.:CURE
Product Description
Double Cartridge Mechanical Seal To Replace AES CURE For Pump Parts
Double cartridge Seals to replace AES CURE Seals For Pump Parts
Suggested Operation Limits:
Temperature:-20ºC~220ºC
Speed:≤15M/S
Pressure:≤2.5Mpa
Size:24mm-100mm/1"-5"
Combined Material:
Rotary Face:CAR/SIC/TC
Stat Ring:SIC/TC
Features:
1.Double cartridge seal
2.Self Aligning stationary face, maximizing seal life
3.Stationary face with radial locating pins minimizes damage in stop / start applications with viscous fluids
4.Quench flush and drain ports for cooling or heating options to maximize seal life
5.Hydraulically balanced seal face technology fir reduced power consumption
Recommended Applications:
1.Process Pumps
2.Other Rotating Equipment
Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.
Double cartridge Seals to replace AES CURE Seals For Pump Parts
Suggested Operation Limits:
Temperature:-20ºC~220ºC
Speed:≤15M/S
Pressure:≤2.5Mpa
Size:24mm-100mm/1"-5"
Combined Material:
Rotary Face:CAR/SIC/TC
Stat Ring:SIC/TC
Features:
1.Double cartridge seal
2.Self Aligning stationary face, maximizing seal life
3.Stationary face with radial locating pins minimizes damage in stop / start applications with viscous fluids
4.Quench flush and drain ports for cooling or heating options to maximize seal life
5.Hydraulically balanced seal face technology fir reduced power consumption
Recommended Applications:
1.Process Pumps
2.Other Rotating Equipment
Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.
Products Category
Contact Us
Name: Leo Zhang
Tel: +86-13067871876
E-mail: [email protected]
Add: Building 2, No. 12, Shengdi Road, Yuhang street, Yuhang District, Hangzhou
Link