High Quality Cartridge Seal To Replace Flowserve ISC2PP And ISC2BB With Metal Bellow Inside For High Temperature Use

The type seal can replace with Flowserve type ISC2BB and ISC2PP cartridge seal. C2P have dual pusher(C2PP)and dual metal bellows (C2BB)cartridge seal design,replacement ISC2PP and ISC2BB

Suggested Operation Limits:

Temperature:-20ºC~220ºC

Speed:≤16M/S

Pressure:≤2.5Mpa

Size:25mm-70mm/1"-2.750"

Combined Material:

Rotary Face:CAR/SIC/TC

Stat Ring:SIC/TC

Features:

1.Robust drive mechanism

2.Dual Cartridge Metal Bellows Seals

3.Optimized high-efficiency barrier circulation promotes cooler running and longer seal life.

4.Diamond seal face option for cooler running, abrasive resistance and longer seal life

Suggested Applications:

1.Nuclear

2.Conventional Steam

3.Concentrated Solar Power

4.Pharmaceutical

5.Water & Waste Water

6.Agriculture

7.Water Management

8.Pulp & Paper

9.Mining

10.Food & Beverage

11.Corn Wet Milling & Ethanol

Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.