Single Metal Bellow Design Mechanical Seal 5610 Equal To Mechanical Seal 5610q

single cartridge seals with all sizes available to replace original ones

Suggested Operation Limits:
Temperature:-30ºC~205ºC
Speed:≤25M/S
Pressure:≤2.1Mpa

Combined Material:
Rotary Face:SIC/TC
Stat Ring:CAR/SIC/TC

Features:
1.A common seal head/mating ring set, utilized throughout all versions, is reversible to allow rotating seat/mating ring or rotating seal head operation, and is interchangeable with metal bellows seal heads.
2.Reversible seal head.
3.Optimized primary ring design for greater reliability.
4.Non-clogging wave spring outside the product.

Recommended Applications:
1.Process Pumps
2.Other Rotating Equipment

Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.