High Quality AES CDSA Double Cartridge Mechanical Seal For Pump

High Quality Aes CDSA Double Cartridge Mechanical Seal For Pump

Suggested Operation Limits:

Temperature:-20ºC-220ºC

Speed:<=16M/S

Pressure:<=2.5Mpa

Size:24mm-125mm/1"-5"

Combined Material:

Rotary Face:CAR/SIC/TC

Stat Ring:SIC//TC

The type seal can replace with AES type CDSA double cartridge seal.

Features:

1,Self-aligning stationary seal-faces with radial contacting pin drive which minimizes damage in stop / start applications and viscous fluids

2,Hydraulically balanced seal-face technology for reduced power consumption

3,Non-shaft-fretting sleeve elastomer and positive set screw shaft drive

4,Independant seal face design to enhance safe containment of process fluid in the event of damage to any individual sealing element

5,Multiple spring seal face loading

Recommended Applications:

1,Process Pumps

2,Other Rotating Equipment

This type seal is ideal for the containment of hazardous process fluids.  

Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.