Single Metal Bellow Type Cartridge Seal 25 mm to 80 mm Hot Sell Seals With Good Price And Short Delivery Time

CM26S Cartridge Mechanical Seal for Paper Pulp Pumps and Sewage Pumps

Suggested Operation Limits:
Temperature:-40ºC-250ºC
Speed:<=15M/S
Pressure:<=2.5Mpa
Size:25mm-80mm

Combined Material:
Rotary Face:SIC/TC
Stat Ring:CAR/SIC//TC
The type seal can replace with single cartridge seal.

Features:
1,.Single seal
2,Cartridge
3,Balanced
4,Independent of direction of rotation
5,Metal Bellow
6,Single seal with quench and lip seal (-QN) or throttle ring (-TN)
7,Supply connections for flush (A) and quench (B)

Advantages:
1,Ideal seal for standardizations
2,Universal applicable for packings conversions, retrofits or OEM
3,Small radial installation height
4,Trouble-free running due to bellows unit with vibration dampers (essential in case of dry-running)
5,No dynamically loaded O-Ring
6,Self cleaning effect of the bellows
7,Straightforward and easy installation due to pre-assembled unit (reduced down-times)

Recommended Applications:
1,Process industry
2,Chemical industry
3,Hot media
4,Cold media
5,Highly viscous media
6,Pumps
7,Special rotating equipment

Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.